Kyocera KM-4230

4
Installing the Printer Driver
4-8
8 Click the [Next] button, and then proceed according to the on-screen
instructions.
9 The Add New Hardware Wizard dialog box appears again.
Repeat steps 4 through 8.
10 When installation is complete, make sure that the icon of the installed
printer appears in the “Printers” window.
11 Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
For Windows Me
1 After using a parallel cable to connect this machine to the computer,
turn on the computer.
✎
Note
Do not disconnect and connect the cable while the computer is
starting up.
2 Insert the CD-ROM into the computer’s CD-ROM drive.
3 Turn this machine on.
The Add New Hardware Wizard dialog box appears.
4 Select Automatic search for a better driver (Recommended), and
then click the [Next] button.
5 Select Specify a Location, and then click the [Browse] button.
6 Specify the directory on the CD-ROM
(\Driver\English\Printer\Win9xME) that contains the printer driver for
Windows Me, and then click the [OK] button.
7 Click the [Next] button, and then proceed according to the on-screen
instructions until the [Finish] button is displayed.
8 Click the [Finish] button.
9 When installation is complete, make sure that the icon of the installed
printer appears in the “Printers” window.