Kyocera KM-4230

Installing the Printer Driver
4
4-9
10 Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
For Windows 2000
1 After using a parallel cable to connect this machine to the computer,
turn on the computer.
✎
Note
Do not disconnect and connect the cable while the computer is
starting up.
2 Insert the CD-ROM into the computer’s CD-ROM drive.
3 Turn this machine on.
The Found New Hardware Wizard dialog box appears.
4 In the Install Hardware Device Drivers dialog box, select Search for a
suitable driver for my device (recommended), and then click the
[Next] button.
The Locate Driver Files dialog box appears.
5 Select Specify a location, and then click the [Next] button.
6 Specify the directory on the CD-ROM
(\Driver\English\Printer\Win2KXP) that contains the printer driver for
Windows 2000, and then click the [OK] button.
7 Click the [OK] button, and then proceed according to the on-screen
instructions until the Completing the Found New Hardware Wizard
dialog box is displayed.
8 Click the [Finish] button.
9 When installation is complete, make sure that the icon of the installed
printer appears in the “Printers” window.
10 Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.