Using Printer Management Utility
12
12-57
E-mail / Internet FAX – Receive
You can specify mail reception settings.
Procedure
➜ On the “Network” tab, click E-mail / Internet FAX, and then click
Receive in the sub-menu that appeared.
POP3 Server Set the IP address of the POP3 server.
POP3 Login Name Set the login name of the POP3 server.
Settings: Up to 63 characters
POP3 Password Set the password for logging in to the POP3 server.
Settings: Up to 15 characters
Mail Check Set whether to periodically check the mail server contents.
If “No” is selected, e-mails will not be received automatically.
If “Yes” is selected, set the interval for automatic reception.
Settings: “Yes” or “No”
1 to 60 (minutes)
Port Number Set the port number for the POP3 server.
(Normally, use the default value of 110.)
POP3 Connection
Timeout
Set the connection timeout for the POP3 server.
Settings: 30 to 300 (seconds)
To Next Page
Loading...
