12
Using Printer Management Utility
12-58
E-mail / Internet FAX – Send
You can specify mail transmission settings.
Procedure
➜ On the “Network” tab, click E-mail / Internet FAX, and then click Send
in the sub-menu that appeared.
SMTP Server Set the IP address for the SMTP server.
Port Number Set the port number for the SMTP server.
(Normally, use the default value of 25.)
SMTP Connection
Timeout
Set the connection timeout for the SMTP server.
Settings: 30 to 300 (seconds)
Maximum E-mail Size Set the maximum size of transmitted mails.
Settings: “No Limitation”, 100 to 3000 KB (in units of 100 KB)
Binary Division Set whether to divide the e-mail into multiple e-mails (binary
unit) when the e-mail size exceeds the maximum e-mail size.
Settings: “Yes” or “No”
For Scan to E-mail, refer to “Binary Division and Scanned File
Separation” on page 8-43.
For Scan to Internet FAX, refer to “Binary Division and
Scanned File Separation” on page 8-68.
To Next Page
Loading...
