Kyocera TASKalfa 181 - Page 112

Printing Functions
5-12 OPERATION GUIDE
5 Press U or V to select Change #, and then press
the Enter key.
6 Press U or V to select the frame mode, and then
press the Enter key.
7 Press the Reset key.
The message display returns to the printer basic
screen.
EtherTalk
When using this machine by connecting to an Apple Macintosh computer, turn EtherTalk On.
1 Display the Interface screen. (See How to Display
the Interface Screen on page 5-11.)
2 Press U or V to select Network, and then press
the Enter key.
3 Press U or V to select EtherTalk, and then
press the Enter key.
4 Press U or V to select On, and then press the
Enter key.
5 Press the Reset key.
The message display returns to the printer basic
screen.
TCP/IP
When connecting to a Windows network through TCP/IP, turn TCP/IP On.
1 Display the Interface screen. (See How to Display
the Interface Screen on page 5-11.)
On
NetWare
Off
Change #
Back
Auto
NetWare Frame
802.3
Back
USB
Interface
Network
Network Setting
NetWare
TCP/IP
EtherTalk
Back
On
EtherTalk
Off