Kyocera TASKalfa 181 - Page 114

Printing Functions
5-14 OPERATION GUIDE
2 Press U or V to select Change #, and then press
the Enter key.
3 Press U or V to select IP Address, and then
press the Enter key.
4 Enter the IP address using the numeric keys.
Enter the first block of 3 digits of the address in the
highlighted area.
5 Press Z.
Enter the next block of 3 digits of the address in the
highlighted area.
6 Continue the same procedure for the other 2
blocks, and then press the Enter key.
Next, set the subnet mask.
Subnet Mask
To register the subnet mask, continue the procedure from step 6 above.
1 Press U or V to select Subnet Mask, and then
press the Enter key.
2 Use the same procedure as steps 4 to 6 of IP
Address setting to input the address, and then
press the Enter key.
Next, set the default gateway.
Default Gateway
To register the default gateway, continue the procedure from step 2 above.
1 Press U or V to select Gateway, and then press
the Enter key.
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
IP Address
0 0 ..0 0 .
IP Address
10 0 ..0 0 .
DHCP
IP Address
TCP/IP Setting
Subnet Mask
Subnet Mask
0 0 ..0 0 .
IP Address
Subnet Mask
TCP/IP Setting
Gateway