Kyocera TASKalfa 181 - Page 157

System Menu
OPERATION GUIDE 6-5
6
3 Press Y or Z to adjust the background color, and
then press the Enter key.
Moving right darkens the background color, and
moving left lightens it.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Paper Selection
Set whether to select automatically the cassette that contains paper of the same size as the original when it is
set or to select the fixed cassette with priority.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Paper Select, and then
press the Enter key.
3 Press U or V to select Auto or Default
cassette, and then press the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Paper Type in Auto Paper Selection
Paper to be selected in the auto paper selection mode can be limited to a certain paper type.
Paper types that can be set: Plain, Transparency, Preprinted, Labels, Bond, Recycled, Vellum,
Rough, Letterhead, Color [Colour], Prepunched, Envelope, Cardstock, Thick paper, High
quality, and Custom 1 (to 8)
NOTE: You can select a paper type from the paper types that are currently set for the cassettes. (See Paper
Type (cassettes 1 to 4) on page x-x.)
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Paper type (Auto), and
then press the Enter key.
Background Adjustment :
4 5 3
12
*
EcoPrint
Background Adjst
Copy Default:
Paper Selection
Off
:
:
Auto
3
:
Paper Selection :
Auto
Default Cassette
*
Background Adjst
Paper Selection
Copy Default:
Paper Type(Auto )
Plain
:
:
Auto
3
: