Kyocera TASKalfa 181 - Page 158

System Menu
6-6 OPERATION GUIDE
3 Press U or V to select Off or On, and then press
the Enter key.
4 If you have selected On, press U or V to select the
desired paper type, and then press the Enter key.
5 Press the Reset key.
The message display returns to the copier basic
screen.
Default Cassette
You can select the cassette (1 to 4) that is automatically selected with priority.
NOTE: On the 18 ppm model, this setting is displayed only if the optional paper feeder is installed.
For the 18 ppm model, cassettes 2 to 4 are included in the optional paper feeder. For the 22 ppm model,
cassettes 3 and 4 are included in the optional paper feeder. This setting is displayed only if the optional paper
feeder is installed.
You cannot set the MP tray as the priority cassette.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Default Cassette, and
then press the Enter key.
3 Press U or V to select the cassette that will be
used with priority, and then press the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Default Magnification
Select whether or not to set the auto zoom ratio selection mode when a cassette is selected.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
Paper Type(Auto):
Off
On
*
Plain
Paper Type(Auto):
Preprinted
Paper Selection
Paper Type(Auto )
Copy Default:
Default Cassette
Plain
:
:
Auto
Casset.1
:
Default Cassette :
Cassette 1
Cassette 2
*
Cassette 3