Kyocera TASKalfa 181 - Page 160

System Menu
6-8 OPERATION GUIDE
3 Press Y or Z to adjust the density, and then press
the Enter key.
Moving right darkens the density, and moving left
lightens it.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Density Adjustment for Text + Photo Originals
Adjust the density of the central value in the manual density mode for text + photo originals.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Txt+Photo Dens, and
then press the Enter key.
3 Press Y or Z to adjust the density, and then press
the Enter key.
Moving right darkens the density, and moving left
lightens it.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Density Adjustment for Text Originals
Adjust the density of the central value in the manual density mode for text originals.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Txt Ori Density, and
then press the Enter key.
3 Press Y or Z to adjust the density, and then press
the Enter key.
Moving right darkens the density, and moving left
lightens it.
Adjust Auto OCR Density :
Default Magnif .
Adj. Auto dens .
Txt+Photo Dens .
Copy Default:
4
:
:
100%
4:
Text+Photo Orig . Dens. Adj.:
Auto dens .(OCR)
Txt+Photo Dens .
Txt Ori Density
Copy Default:
4:
4:
4:
Text Original Density Adjust :