Kyocera TASKalfa 181 - Page 161

System Menu
OPERATION GUIDE 6-9
6
4 Press the Reset key.
The message display returns to the copier basic
screen.
Density Adjustment for Photo Originals
Adjust the density of the central value in the manual density mode for photo originals.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Photo Ori Dnsity, and
then press the Enter key.
3 Press Y or Z to adjust the density, and then press
the Enter key.
Moving right darkens the density, and moving left
lightens it.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Collate Copying
If the optional document finisher is installed, select whether or not to set the sort copy mode as a default setting.
NOTE: This item is displayed only if the optional document processor is installed.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Collate, and then press
the Enter key.
3 Press U or V to select Off or On, and then press
the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Txt+Photo Dens .
Photo Ori Dnsity
Txt Ori Density
Copy Default:
4:
4:
4:
Photo Original Density Adjust :
Collate
Copy Default:
On:
4:
4:
Photo Ori Dnsity
Txt Ori Density
Collate:
Off
On
*