Kyocera TASKalfa 181 - Page 162

System Menu
6-10 OPERATION GUIDE
Offset Copying
Select whether or not to set the offset copy mode as a default setting.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Offset, and then press the
Enter key.
3 Press U or V to select Off or On, and then press
the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Auto Rotation Copy
Select whether or not to set the auto rotation copy mode as a default setting.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Auto Rotation, and then
press the Enter key.
3 Press U or V to select Off or On, and then press
the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Margin Width Default Value
Set the default value of the margin width.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
Copy Default:
Offset
Collate On:
４ :Photo Ori Dnsity
Off:
Offset :
Off
On
*
Auto Rotation
Copy Default:
Offset
Collate On
Off
:
:
On:
Auto Rotation :
Off
On
*