Kyocera TASKalfa 181 - Page 163

System Menu
OPERATION GUIDE 6-11
6
2 Press U or V to select Margin Width, and then
press the Enter key.
3 Press U or V to set the default value of margin
width, and then press the Enter key.
You can set the value to 1/8" to 3/4" in 1/8"
increments [1 mm to 18 mm in 1 mm increments].
4 Press the Reset key.
The message display returns to the copier basic
screen.
Border Erase Width Default Value
Set the default value of the border erase width.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select BorderEraseWidth
[Border Er. width], and then press the Enter
key.
3 Press U or V to set the default value of border
erase width, and then press the Enter key.
You can set the value to 1/8" to 3/4" in 1/8"
increments [1 mm to 18 mm in 1 mm increments].
4 Press the Reset key.
The message display returns to the copier basic
screen.
Limit of Number of Copies
Set the limit of the number of copies that can be set at a time.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Copy Limit, and then
press the Enter key.
Margin Width
Auto Rotation
Offset Off:
1/4":
Copy Default:
On:
Margin Width :
1/8"1/4" 3/4"
BorderEraseWidth
Margin Width
Auto Rotation
1/4":
Copy Default:
On:
1/4":
Border Erase Width:
1/8"1/4" 3/4"
Copy Limit
BorderEraseWidth
Margin Width 1/4":
Copy Default:
1/4":
999:Set