Kyocera TASKalfa 181 - Page 164

System Menu
6-12 OPERATION GUIDE
3 Enter the maximum number of copies (1 to 999)
using the numeric keys, and then press the Enter
key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Black Streaking Reduction Processing
If black streaks (streaks that are not contained in the original image) appear on copies from the optional
document processor, you can make black streaking less noticeable. Since the black streaking reduction
processing reduces the reproducibility of fine characters, it is normally recommended to use the factory default
setting.
1 Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2 Press U or V to select Corr. Black line, and
then press the Enter key.
3 Press U or V to select None, Weak or Strong, and
then press the Enter key.
NOTE: To use the black streaking reduction
processing, first select Weak. If black streaking is not
reduced, select Strong.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Sets
Copy Limit:
999
# keys
Corr. Black Line
Copy Limit
BorderEraseWidth
Copy Default:
1/4":
999:Set
None:
Correct. Fine black line :
None
Weak
*
Strong