Kyocera TASKalfa 181 - Page 171

System Menu
OPERATION GUIDE 6-19
6
Original Orientation
Set the default original orientation.
1 Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2 Press U or V to select Orig. direction, and
then press the Enter key.
3 Press U or V to select Top Edge Top or Top
Edge Left, and then press the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Auto Sleep Time
Set the time that elapses before the auto sleep function is activated if you have turned on the auto sleep function
(see page 6-25).
Time that can be set:
Inch Specification— 1 to 240 minutes (in 1 minute increments)
Metric Specification— 1 to 120 minutes (in 1 minute increments)
NOTE: It is recommended to set a longer time if you use the machine frequently, and to set a shorter time if
not.
For the inch specification machine, if the auto sleep function causes inconvenience for operation of this
machine, disable this function. It is recommended, however, to set a longer time before disabling this function.
On the inch specification machine, if you have disabled the auto sleep function, this item is not displayed.
1 Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2 Press U or V to select Sleep mode time, and
then press the Enter key.
3 Press Y or Z to select the desired time from 1 to
240 minutes [1 to 120 minutes], and then press the
Enter key.
Orig. Orient. Top Edge:
Machine Default :
P. Type (2sided)
Specific P . Type Fast Mode:
Original Orientation :
Top Edge Top
Top Edge Left
*
Machine Default :
Sleep Mode Time
Orig. Orient.
:
Top Edge:
1:
Specific P . Type Fast Mode
Min.
1-240
Sleep Mode Time :
Min.1 Min.