Kyocera TASKalfa 181 - Page 191

Job Accounting
OPERATION GUIDE 7-5
7
NOTE: You can change the management method so that you can set the limit of count for copying and printing
respectively. For details, refer to the KM-NET for Accounting Operation Guide.
Copy Restriction
You can select whether to permit or prohibit copying.
NOTE: This item is displayed if Copier Job Accounting in the default settings is set to On. (See page 7-13.)
1 Display the Limit in use screen referring to steps 1
to 5 of Registering a New Account.
2 Press U or V to select Copy, and then press the
Enter key.
3 Press U or V to select Able to use or Unable
to use, and then press the Enter key.
The message display returns to the Limit in use
screen.
Print Restriction
You can select whether to permit or prohibit printing.
NOTE: This item is displayed if Printer Job Accounting in the default settings is set to On. (See page 7-14.)
1 Display the Limit in use screen referring to steps 1
to 5 of Registering a New Account.
2 Press U or V to select Printer, and then press
the Enter key.
Fax transmission
limit
Set the limit of count of fax transmission if the optional fax kit is
installed.
No limit: Does not set the limit of count of fax transmission.
Counter limit: Set the limit of count of fax transmission (0 to
999,999).
Is not permitted: Prohibits use of fax transmission.
7-7
Item Description of limit Reference page
Limit in use:
Able use
:
:
Able use
Printer
End
Copy
Copy :
Able to use
Unable to use
*
Limit in use :
Able use
:
:
Able use
Printer
End
Copy