Kyocera TASKalfa 181 - Page 192

Job Accounting
7-6 OPERATION GUIDE
3 Press U or V to select Able to use or Unable
to use, and then press the Enter key.
The message display returns to the Limit in use
screen.
Output Limit
You can set the limit of total count of copying and printing.
NOTE: This item is not displayed if both Copy Restriction and Print Restriction are set to Unable to use.
1 Display the Limit in use screen referring to steps 1
to 5 of Registering a New Account.
2 Press U or V to select Output limit, and then
press the Enter key.
3 Press U or V to select No limit or Counter
limit, and then press the Enter key.
If you have selected Counter limit, the Counter
limit Default Value screen is displayed. Proceed to
the next step.
4 Enter the counter limit using the numeric keys.
You can set the limit to 999,999 at the maximum in
1 sheet increments.
5 Press the Enter key.
The message display returns to the Limit in use
screen.
Scanner Transmission Limit
You can set the limit of count of scanner transmission if the optional network scanner kit is installed.
NOTE: This item is displayed if Scanner Job Accounting in the default settings is set to On. (See page 7-14.).
1 Display the Limit in use screen referring to steps 1
to 5 of Registering a New Account.
2 Press U or V to select Scanner TX [Scan.
Trans], and then press the Enter key.
Printer :
Able to use
Unable to use
*
Output Limit
Limit in use :
Copy
Printer Able use
:
:
Able use
No limit:
Output Limit
No Limit
Counter Limit
*
Counter Limit Default Value :
Limitation
999.999
Output Limit
Limit in use :
Printer
Scanner TX
Able use
:
:
Able use
No limit: