Kyocera TASKalfa 181 - Page 193

Job Accounting
OPERATION GUIDE 7-7
7
3 Press U or V to select No limit or Counter
limit or Is not permitted, and then press the
Enter key.
If you have selected Counter limit, the Counter
limit Default Value screen is displayed. Proceed to
the next step.
4 Enter the counter limit using the numeric keys.
You can set the limit to 999,999 at the maximum in
1 sheet increments.
5 Press the Enter key.
The message display returns to the Limit in use
screen.
Fax Transmission Limit
You can set the limit of count of fax transmission if the optional fax kit is installed.
NOTE: This item is displayed if Fax Job Accounting in the default settings is set to On. (See page 7-15.).
1 Display the Limit in use screen referring to steps 1
to 5 of Registering a New Account.
2 Press U or V to select Fax TX [Fax transm], and
then press the Enter key.
3 Press U or V to select No limit or Counter
limit or Is not permitted, and then press the
Enter key.
If you have selected Counter limit, the Counter
limit Default Value screen is displayed. Proceed to
the next step.
4 Enter the counter limit using the numeric keys.
You can set the limit to 999,999 at the maximum in
1 sheet increments.
5 Press the Enter key.
The message display returns to the Limit in use
screen.
Scanner Transmitting :
No Limit
Counter Limit
*
Is not permitted
Counter Limit Default Value :
Limitation
999.999
Output Limit
Limit in use :
Scanner TX
Fax TX No limit:
No limit:
No limit:
Fax Transmitting :
*
No Limit
Counter Limit
Is not permitted
Counter Limit Default Value :
Limitation
999.999