Troubleshooting
9-8 OPERATION GUIDE
Memory card error
Insert again.
The memory card is
accidentally removed
during printer setting.
Insert the memory card.
NOTE: When inserting the memory
card, turn the main power switch off.
—
Misfeed in DP.
Remove original(s)
.
Originals have jammed in
the optional document
processor.
Leave the main power switch on ( | )
and follow the appropriate procedure
to remove the jammed originals.
—
Out of Staples
Please Add Staples
[Stapler Empty.
Add Staples.]
There are no staples left in
the optional finisher.
Add staples. Appendix-
5
Paper capacity
exceeded. Remove
paper from Job sep.
There are already 100
sheets of paper stored on
the optional job separator.
Remove the paper. Appendix-
7
Paper misfeed. A paper jam has occurred. The location of the jam is indicated
on the message display, and the
machine stops. Leave the main
power switch on ( | ) and follow the
appropriate procedure to remove the
jammed paper.
—
Paper misfeed in
Finisher, lower
Process Tray and
remove paper.
Paper has jammed in the
optional finisher.
Remove the paper. —
Error Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
