Troubleshooting
OPERATION GUIDE 9-11
9
Set toner
container.
The toner container is not
set properly.
Set the toner container properly. 8-9
Shake the toner
container.
The toner container is not
tapped or shaked properly.
Tap and shake the new toner
container without spilling the toner,
and install it again.
8-9
System error.
Main switch off /
on.
This message is displayed
when a malfunction due to
noise or the like or a
communication error
during printer processing
has occurred.
Follow the procedure below.
1 Turn the main power switch off. If
printer output is being performed,
cancel printing on the computer.
2 Wait more than five seconds and
then turn the main power switch
on ( | ). The error is cleared. If
printing has been performed,
perform output again.
—
Time for
maintenance
Periodic maintenance is
required to keep this
machine in good condition.
Contact your service representative
or authorized service center
immediately.
—
Unable to copy.
Please Add Toner
[Cannot copy.
Add toner, resume
copying.]
No toner remains. Replace the toner container to add
toner.
8-6
Error Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
