Uroflow Report Flowmaster User’s and Service Manual | LBL-000990 [B]. 29
• Click on the Settings button to change the layout and content of the
selected uroflow report, for example the flow scale or deselect print volume
graph (to print the flow graph only). These settings will be saved with the
selected uroflow report only.
• Click on the Comments button to add comments to the selected uroflow
report.
• Click on the Zoom buttons to zoom in and to zoom out on details.
4.2 Uroflow Results
The calculated and printed uroflow results are described in this paragraph. The
characters between square brackets refer to corresponding characters in the
figure below.
Figure 4.2 Uroflow results
Flow rate (ml/s)
Flow rate is defined as the volume of fluid expelled via the urethra per unit
time. It is expressed in ml/s.
Average flow rate (ml/s)
The average flow rate is voided volume divided by flow time. The average flow
rate should be interpreted with caution if flow is interrupted or if there is a
terminal dribble.
To Next Page
Loading...
