LABORIE Flowmaster - Measured Values Are Not Within Limits; Whats the Meaning of the Status LED

48 Laborie Flowmaster User’s and Service Manual | LBL-000990 [B] Chapter 7
 When small weights are displayed correctly, but when the weight on the
flowsensor is increased and the displayed value is not increasing at a
certain weight value anymore (< 2000 gram), contact your Laborie
representative.
7.4 Measured Values Are Not Within Limits
The allowed limits are as follows:
Used weight (gram)
Allowed limits (gram) (± 1%)
50
100
500
1000
2000
± 0,5
± 1
± 5
± 10
± 20
When the measured values are not within the allowed limits, contact your
Laborie representative.
7.5 What’s the Meaning of the Status LED?
The Bluetooth flowsensor contains one LED for Bluetooth and Status
indication. In the table below you will find a description.
LED
Indication
Orange On
Initial program load/firmware error. Service required,
please contact your Laborie representative.
Green blinking
(short periods off)
Bluetooth communication flowsensor powered by
power supply.
Green blinking
(long periods off)
Bluetooth communication flowsensor powered by
batteries.
Red blinking
Low battery message, place new batteries in the
battery compartment.
Off
Indications can be:
• No or empty batteries. Place new batteries in the