Introduction Flowmaster User’s and Service Manual | LBL-000990 [B] 9
1.5 Clinical Benefits
The Laborie Flowmaster uroflowmetry products, when used in concert with
other Laborie uroflowmetry products, assist healthcare professionals in
diagnosing patients of all populations with lower urinary tract voiding or
incontinence problems.
1.6 Performance Characteristics
The Laborie Flowmaster uroflowmetry system measures a patient’s urinary
flow rate and volume, with the results used to verify or disprove patient
symptoms via scientific methodology. Data is acquired by means of an
intergated transducer in the Flowsensor and then processed by the Laborie
uroflow software application. Results can be printed out in graphical form,
including a software-calculated Voiding Summary.
1.7 Safety Information
The Flowmaster User’s & Service Manual is intended for all users of the
Flowmaster measurement system. Before working with the system and its
manual, please take notice of the safety information as described in
appendix A.
The Flowmaster measurement system complies with the requirements as
stated by IEC 60601-1, IEC 60601-1-2, ANSI/AAMI ES60601-1, and
CAN/CSA-C22.2 No. 60601-1.
1.8 Applied Parts
The Flowmaster has no applied parts.
1.9 Disposing of Product After Use
The FlowMaster equipment and consumables should be disposed of in the
following manner:
• Contaminated single-use consumables: Discard these products
according to the standard operating procedures on medical waste
handling at the institution of use.
To Next Page
Loading...
