60 Flowmaster User’s and Service Manual | LBL-000990 [B] Chapter 9
▪ The program shows a list with all available flowmeters.
▪ Select the radio button of a flowmeter and click on the Select button.
▪ Send the patient to the room with that flowmeter. Be sure that the patient
visits that specific room.
▪ You can repeat the procedure for the next patient.
▪ The moment that one or more flowmeters detect urine simultaneously,
recording starts and the measured uroflows are displayed on the monitor
screen next to each other. Each window indicates name and serial number
of the flowmeter.
▪ Recording stops automatically when the post flow time elapsed after the
last flow detection. It is also possible to click on the Stop and save button.
Patient information and uroflow results have been saved in the database
program.
▪ The information is printed on paper and saved as PDF and/or JPG
document as set in the investigation protocol.
▪ The information in the header tells you name and serial number used by
the patient. Click on the Print button to print the uroflow report.
9.4 Investigation Protocol and Flow Scheduler
The investigation protocol and flow scheduler settings will affect all available
flowmeters. To change these settings, just click with the mouse button on a
flowmeter icon in the flow program or use the menu items in the database
program.
9.5 Diagnostics
Use diagnostics to test one flowmeter and to show status information.
Click with the mouse button on the icon of the flowmeter you want to test and
choose Diagnostics in the flow program. See § 5.2.5 for more details about
the procedure
.
To Next Page
Loading...
