Installation Flowmaster User’s and Service Manual | LBL-000990 [B] 21
2.7 Select the Uroflow Procedure
Read the information in chapter 3 and determine the best uroflow procedure
for your situation. Use the information in chapter 5 to configure all available
settings.
2.8 Test the Flowmeter
Use the information in chapter 3 to perform a uroflow investigation. Fill the
urine container slowly with water (e.g. 250 ml) and check if the procedure and
results are as expected. You can also use the diagnostic instructions as
described in § 6.3 to test the Bluetooth flowmeter.
To Next Page
Loading...
