Technical SpecificationsFlowmaster User’s and Service Manual | LBL-000990 [B] 73
Storage conditions:
- Condition: System is clean, dry and protected by dust cover
- Temperature range: -10 °C to + 50 °C
- Relative humidity range: 15 % to 90 %, non-condensing
- Atmospheric pressure range: 700 hPa to 1060 hPa.
Transport conditions:
- Condition: System is clean, dry and protected by the manufacturer’s
packaging
- Temperature range: -25 °C to + 70 °C
- Relative humidity range: ≤ 90 %, non-condensing
- Atmospheric pressure range: 700 hPa to 1060 hPa.
Product Lifetime:
- Six years
Plastics and rubbers can become brittle at lower temperatures and soft at
higher temperatures, this is no problem if not used.
Electronic components are selected to cope with the specified conditions.
The system can withstand the transport conditions provided it is clean, dry and
protected by the manufacturer’s packaging.
Before putting into storage, it must be clean, dry and protected by a dust
cover.
Before taking the system into operation, the system must be allowed to
acclimatize to the specified operating conditions for at least 4 hours.
11.5 Classification/Approval
• IEC 60601-1
• Protection Class II with prescribed power supply
• IEC 60601-1-2
• Class I(m) medical device
• ANSI/AAMI ES60601-1
• CAN/CSA-C22.2 No. 60601-1
• SGS contract no. 800174
To Next Page
Loading...
