162 Electrical System
Circuit breakers
There is a button on the circuit breaker of the relay box located inside the cab. Pushing this button
resets the breaker.
NOTE: Consult the OEM manual for information on equipment not manufactured by Labrie
Enviroquip Group.
The following table provides a description of the circuit breakers located in the control box inside the
truck cab.
Important
Never hold down the reset button when the reset operation fails. This may result in severe
electrical damage. Report this problem to your supervisor and maintenance department.
Function Ampere Circuit Number
Monitor (W2) 7.5 141
Cab fan (W3) 15 135
Scale Air-Weigh System power & acc. (W4) 10 161
Electronic controller (W5) 10 168
To Next Page
Loading...
Need help?
General
