3
General
Maintenance
Cleanliness
Cleanliness is part of safety.
As such:
Clean all vehicle lights, warning lights and safety
stickers so that you and the vehicle surroundings
are safe at all times.
Clean the contact surface between the body and
the chassis. Labrie Enviroquip Group recommends
cleaning the chassis after every unloading.
Remove any stacked garbage in the hopper area.
Make sure that the side step and/or hopper step (if
installed) are clean and free of any slippery
material.
Danger!
Always lock out and tag out the vehicle
during inspection and maintenance (see
Locking Out and Tagging Out the Vehicle
on page 12).
Danger!
Always use the stepladder to reach the
higher parts of the vehicle. Also, do not
climb on to the truck roof as it has not
been designed to be walked on.
Caution!
Keep the cab floor dry and clean to
prevent slipping and falling.
To Next Page
Loading...
Need help?
General
