Labrie automizer Service Manual

General Maintenance 67
Rollers
If the roller itself has to be replaced because of wear, apply the following procedure:
1. Once the roller has been removed from the follower panel (see Follower Panel Roller Assemblies
on page 65), remove the external snap ring.
Figure 3-61 Removing external snap ring
2. Remove the washer.
Figure 3-62 Removing washer
3. Slide out the roller.
4. Reverse the previous steps to reinstall the roller.

Labrie automizer Specifications

General

Brand	Labrie
Model	automizer
Category	Automobile
Language	English