Labrie automizer Service Manual

154 Hydraulic System
Figure 5-33 Strainer assembly on steel tank
Replacing Filter Elements
IMPORTANT: To protect new components of the hydraulic system, the return filter element must be changed after
the first 50 hours of operation of the vehicle. Change the element twice a year afterwards (see
AUTOMIZER™ Preventive Maintenance Chart on page 22).
The filter restriction indicator will indicate, when the engine is running, if the filter needs to be
changed. Replace the filter before the indicator reaches the red zone. This will keep the oil clean,
extend component life expectancy and reduce failures.
Seal
Strainer

Labrie automizer Specifications

General

Brand	Labrie
Model	automizer
Category	Automobile
Language	English