Leica SL2 - Pre Focus

Picture Mode
EN
108
ACCESSING THE ACTIVE PROFILE
▸ Select FocusingFocusing in the main menu
▸ Select AF SetupAF Setup
▸ Select AF ProfilesAF Profiles
CHANGING THE ACTIVE PROFILE
▸ Accessing the active profile
▸ Press the joystick/thumbwheel
• The currently selected profile is marked as changeable by red
lettering and two small white triangles on either side.
▸ Press the joystick left/right
or
▸ Turn the thumbwheel
ADJUSTING THE ACTIVE PROFILE
▸ Accessing the active profile
▸ Select desired parameter
▸ Press the joystick/thumbwheel
▸ Set the desired value
RESETING THE ACTIVE PROFILE
▸ Accessing the active profile
▸ Press the joystick to the right
▸ Press the joystick/thumbwheel
PRE FOCUS
When the function is active, the camera carries out a continuous
depth mapping in realtime before the actual focusing. That allows a
pre-identification of possible focus points in a scene. It speeds up
the autofocus function significantly.
The pre-focus function is compatible with all AF modes and AF
metering methods.
Factory setting: OnOn
▸ Select FocusingFocusing in the main menu
▸ Select AF SetupAF Setup
▸ Select Pre FocusPre Focus
▸ Select OnOn/OffOff