Leica SL2 - Aspect Ratio; Image Stabilization; Setting the Stabilization Direction

Recording - Basic settings (picture)
EN
92
ASPECT RATIO
You have a choice of aspect ratios to select in addition to the basic
3:2 (e.g. 1:1). The relevant cropped section will be displayed.
Recordings made in JPG format are saved with the relevant aspect
ratio. DNG recordings will always have the natural sensor format
(3:2), the set aspect ratio is only in aid of the image composition.
In review mode, DNG recordings will be displayed with horizontal or
vertical auxiliary lines showing the cropped section seen when
recording.
Factory setting: 3:23:2
▸ Select Photo Aspect RatioPhoto Aspect Ratio in the main menu
▸ Select the desired setting
(3:23:2, 7:57:5, 4:34:3, 1:11:1, 3:13:1 , 16:916:9)
IMAGE STABILIZATION
The less favorable the lighting conditions during recording, the
slower will be the required shutter speeds for correct exposure.
Visual image stabilization is a great tool for preventing out-of-focus
images due to blurring.
Factory setting: OnOn
▸ Select Image StabilizationImage Stabilization in the main menu
▸ Select OnOn/OffOff
SETTING THE STABILIZATION DIRECTION
For camera pans it can be useful to only correct camera shake in
specific directions.
Factory setting: NormalNormal
Normal Camera shake in all directions (horizontal,
vertical, rotational) will be corrected
automatically.
Automatic The camera recognizes the panning direction
automatically and corrects orthogonal
camera shake autonomously.
Vertical panning Only horizontal camera shake will be
corrected.
Horizontal
panning
Only vertical camera shake will be corrected.
▸ Select Panning ModePanning Mode in the main menu
▸ Select the desired setting
(NormalNormal, Auto PanningAuto Panning, Vertical PanningVertical Panning, Horizontal PanningHorizontal Panning)