Leica SL2 - Evf Frame Rate; Automatic Lcd Panel and Evf Shutdown; Acoustic Signals; Volume

EN
Camera basic settings
75
EVF FRAME RATE
The image frequency o the EVF can be set.
▸ Select Display SettingsDisplay Settings in the main menu
▸ Select EVF Frame RateEVF Frame Rate
▸ Select the desired setting
(60 fps60 fps, 120 fps120 fps)
AUTOMATIC LCD PANEL AND EVF SHUTDOWN
The LCD panel and EVF deactivate automatically to save power
Factory setting: 1 min1 min
▸ Select Camera SettingsCamera Settings in the main menu
▸ Select Power SavingPower Saving
▸ Select All Displays Auto OffAll Displays Auto Off
▸ Select the desired setting
(30 s30 s, 1 min1 min, 5 min5 min)
Note
• The top display is not affected by the automatic shutdown.
ACOUSTIC SIGNALS
Some functions can be acknowledged with acoustic signals. The
following special functions can be configured separately:
– Electronic shutter sound
– AF Confirmation
VOLUME
The volume of active signals can be set.
▸ Select Camera SettingsCamera Settings in the main menu
▸ Select Acoustic SignalAcoustic Signal
ACOUSTIC SIGNALS
This setting specifies, whether the camera shout output general
notification signals, e.g. during the delay time of the self-timer or
as a warning signal, when the memory card is full.
▸ Select Camera SettingsCamera Settings in the main menu
▸ Select Acoustic SignalAcoustic Signal
▸ Select Acoustic SignalsAcoustic Signals
▸ Select OnOn
ELECTRONIC SHUTTER SOUND
▸ Select Camera SettingsCamera Settings in the main menu
▸ Select Acoustic SignalAcoustic Signal
▸ Select Electronic Shutter SoundElectronic Shutter Sound
▸ Select OnOn