Leica SL2 - Using Autofocus in Mf Mode; Iso Sensitivity

EN
Picture Mode
115
USING AUTOFOCUS IN MF MODE
The joystick can be used as needed for automatic focusing. The AF
modes AFs and AFc are available.
You can also concurrently carry out exposure metering and save
the resulting value (see p.128).
▸ Select Customize ControlCustomize Control in the main menu
▸ Select JoystickJoystick
▸ Select MF ModeMF Mode
▸ Select the desired setting
(AFsAFs, AFs + AE-LAFs + AE-L, AFcAFc, AFc + AE-LAFc + AE-L)
The metering functions are distributed as follows while the joystick
is pressed and held:
Menu settings Joystick Shutter button
AFs + AE-LAFs + AE-L
AFc + AE-LAFc + AE-L
Exposure and focus –
AFsAFs
AFcAFc
Sharpness Exposure
▸ Aim at the object
▸ Press and hold the joystick
• The measurement is taken and saved.
▸ Store more measurements via the shutter button as needed
▸ Select the final image section
▸ Shutter release
ISO SENSITIVITY
The ISO setting covers a range between ISO 50 and ISO 50000,
allowing you to adapt to the relevant situation as required.
There is more leeway for the use of preferred shutter speed and
aperture combinations when setting the exposure manually. You
can set priorities within the scope of the automatic setting, e.g. for
reasons of picture composition.
Factory setting: Auto ISOAuto ISO