Leica SL2 - Wind Noise Reduction; Time Code; Time Code Mode

Recording - Basic settings (video)
EN
98
WIND NOISE REDUCTION
Wind noise reduction can be adjusted individually for the internal
and the external microphone.
INTERNAL MICROPHONE
Factory setting: LowLow
▸ Select Video SettingsVideo Settings in the main menu
▸ Select Wind EliminationWind Elimination
▸ Select Internal MicrophoneInternal Microphone
▸ Select the desired setting
(HighHigh, LowLow, OffOff)
EXTERNAL MICROPHONE
Factory setting: OffOff
▸ Select Video SettingsVideo Settings in the main menu
▸ Select Wind EliminationWind Elimination
▸ Select External MicrophoneExternal Microphone
▸ Select the desired setting
(HighHigh, LowLow, OffOff)
TIME CODE
The time code is a data record that is generated and recorded
alongside the image and audio data. It ensures the correct time
assignment of picture and audio signals after cutting or after later
separate processing. Time code mode and start time can be
selected.
TIME CODE MODE
Time information is written to the recorded video file if the time
code setting is activated.
Factory setting: OffOff
OffOff Timekeeping begins at 00:00:00.00 for every
recording.
Free RunFree Run The timer continues running regardless of whether the
camera is currently recording video.
Rec RunRec Run The timer only runs while a video is being recorded.
The timer will stop when recording ends and will
continue when the next recording starts.
Select Video SettingsVideo Settings in the main menu
▸ Select Time CodeTime Code
▸ Select ModeMode
▸ Select the desired setting
(OffOff, Free RunFree Run, Rec RunRec Run)