Leica SL2 - Image Properties; Color Profile; Monochrome Profile

EN
Recording - Basic settings (picture)
89
IMAGE PROPERTIES
One of the many advantages of digital photography is that it is very
easy to change key image properties.
You can manipulate contrast, sharpness and color saturation
before recording.
CONTRAST
The contrast setting, i.e. the difference between light and dark
image sections, determines whether an image comes across as
"flat" or "brilliant". Increasing or decreasing this difference impacts
on contrast, meaning that some image sections are rendered with
more or less light.
SHARPNESS
The impression of sharpness in a picture is largely determined by
edge sharpness, i.e. by how slight the transition area between light
and dark is at edges in the picture. Expanding or reducing these
areas will therefore change the impression of sharpness.
COLOR SATURATION
The saturation factor in color images determines, whether colors in
the picture appear "pale" and pastel-like or "bright" and colorful.
While you can’t do anything about weather conditions (clear/
misty), you can change the way an image is rendered.
COLOR PROFILE
Three pre-configured color profiles are available:
Factory setting: StandardStandard
– StandardStandard
– VividVivid
– NaturalNatural
▸ Select JPG SettingsJPG Settings in the main menu
▸ Select Film StyleFilm Style
▸ Select a profile
MONOCHROME PROFILE
Two pre-configured monochrome profiles are available:
– MonochromeMonochrome
– Monochrome High ContrastMonochrome High Contrast
▸ Select JPG SettingsJPG Settings in the main menu
▸ Select Film StyleFilm Style
▸ Select a profile