Leica SL2 - Floating Iso

EN
Picture Mode
117
LIMITING SHUTTER SPEED RANGES
Factory setting: AutoAuto
▸ Select Auto ISO SettingsAuto ISO Settings in the main menu
▸ Select Shutter Speed LimitShutter Speed Limit
▸ Select the desired value
(AutoAuto, 1/20001/2000, 1/10001/1000, 1/5001/500, 1/2501/250, 1/1251/125, 1/601/60, 1/301/30, 1/151/15, 1/81/8, 1/41/4,
1/21/2)
LIMITING ISO VALUES (FLASH)
▸ Select Auto ISO SettingsAuto ISO Settings in the main menu
▸ Select Maximum ISO with FlashMaximum ISO with Flash
▸ Select the desired value
(100100, 200200, 400400, 800800, 16001600, 32003200, 64006400, 1250012500, 2500025000, 5000050000)
LIMITING SHUTTER SPEED RANGES (FLASH)
Factory setting: 1/151/15
▸ Select Auto ISO SettingsAuto ISO Settings in the main menu
▸ Select Shutter Speed Limit with FlashShutter Speed Limit with Flash
▸ Select the desired value
(AutoAuto, 1/2501/250, 1/1251/125, 1/601/60, 1/301/30, 1/151/15, 1/81/8, 1/41/4, 1/21/2)
FLOATING ISO
This function complements Auto ISO. Light strength changes with
many zoom lenses when the focal length is changed. Floating ISO
will in this situation adjust the sensitivity in fine graduations and will
simultaneously ensure that the selected settings of exposure value
and shutter speed remain constant in (semi) automatic exposure
modes. This will specifically in video recordings prevent visible
jumps in brightness.
Factory setting: OnOn
▸ Select Floating ISOFloating ISO in the main menu
▸ Select OnOn
Note
• Floating ISOFloating ISO can work only if the original ISO setting allows scope
for change, i.e. the highest/lowest ISO setting is not already
being used. The Floating ISOFloating ISO warning icon will be displayed in that
case.