Leica SL2 - Distance Display

Picture Mode
EN
114
Adjusting the enlargement function
▸ Turn the thumbwheel/front setting wheel
Changing the position of the enlarged section
▸ Swiping will allow you to move the position of an enlarged
cropped section
or
▸ Press the joystick in the relevant direction
Exiting the enlargement function
▸ Tap the shutter button
Note
• The enlargement function remains active until it is exited.
DISTANCE DISPLAY
Distance information is shown in the top display during manual
focusing.
– Focus Mode MF: when the shutter button is pressed to the first
pressure point
– Focus Mode AF: when the shutter button is pressed and held at
the first pressure point, followed by a turning of the focus setting
ring
The unit of measure (mm or ftft) can be selected, see p.71.