EN
Picture Mode
129
METERING MEMORY LOCK IN AF MODE
The metering functions are distributed as follows while the joystick
is pressed and held:
Menu settings Joystick Shutter button
AF-L + AE-LAF-L + AE-L Exposure and focus –
AF-LAF-L Sharpness Exposure
AE-LAE-L Exposure Sharpness
The shutter button will store both measured values if the joystick is
not pressed.
Via the shutter button
▸ Aim at the key part of the object or at a similar detail
▸ Tap and hold the shutter button
• The measurement is taken and saved.
▸ Select the final image section
▸ Shutter release
Via the Joystick
▸ Select Customize ControlCustomize Control in the main menu
▸ Select JoystickJoystick
▸ Select AF ModeAF Mode
▸ Select the desired setting
▸ Press and hold the joystick
• The measurement is taken and saved.
▸ Store more measurements via the shutter button as needed
▸ Select the final image section
▸ Shutter release
METERING MEMORY LOCK IN AF MODE
In NF mode, only the exposure can be locked via the shutter
button. This function can also be assigned to the joystick.
The exposure value is saved via the shutter button independent of
the setting if the joystick is not pressed.
Via the shutter button
▸ Aim at the key part of the object or at a similar detail
▸ Tap and hold the shutter button
• The measurement is taken and saved.
▸ Select the final image section
▸ Shutter release
Via the Joystick
▸ Select Customize ControlCustomize Control in the main menu
▸ Select JoystickJoystick
▸ Select MF ModeMF Mode
▸ Select AE-LAE-L
▸ Press and hold the joystick
• The measurement is taken and saved.
▸ Select the final image section
▸ Shutter release
To Next Page
