4-10 Description and Operation
D-I012.1109EN
innovators in agriculture
E-Link Manual Controller
The E-Link Manual Controller controls and monitors the JUNO 150 and
communicates with the management software.
The E-link Manual Controller has an LCD display and nine buttons that
enable the user to give commands and change values in the JUNO 150.
The LCD display also shows reports and alarms.
The connector of the E-Link Manual Controller is connected to the
multiboard PCB box.
The E-Link has the following buttons:
• Soft buttons (1) execute the command on the LCD display above the
applicable button
• Button (2) starts or stops an action
• Button (3) moves the selector down one item or decreases a value by
one
• Button (4) opens the selected function or the next menu screen
• Button (5) reduces the speed of the vehicle
• Button (6) returns to the previous screen
• Button (7) moves the selector up one item or increases a value by one
Display (8) displays menus and texts.
Figure 18. The E-Link Manual Controller
To Next Page
Loading...
