vii
D-I012.1109EN
innovators in agriculture
PREFACE
Manual Contents
This manual contains the information necessary to install the JUNO 150
Feed Pusher. It also includes operating and maintenance information.
Study and understand this information thoroughly before you install,
operate or do maintenance work on the JUNO 150 Feed Pusher. Failure
to do so could result in personal injury or damage to equipment. Please
consult your local Lely service provider if you do not understand the
information in this manual, or if you need additional information.
All information in this manual has been compiled with care. Lely shall
not be liable for errors or faults in this manual. The recommendations
are meant to serve as guidelines. All instructions, pictures and
specifications in this manual are based on the latest information that
was available at the time of publication. Your JUNO 150 Feed Pusher
may comprise improvements, features or options that are not covered in
this manual.
Applicability
The table below shows the type numbers of JUNO 150 for which this
manual is applicable and the software version the procedures are based
on.
Model designation
Model Type number
Lely JUNO 150 Feed Pusher 5.4301.0000.1
Software version
The description, operation and procedures in this manual are based on
the software version:
• Multiboard pcb: JUN1.04R.bx
• E-Link: 1.07
Standard Torque Loading of Parts
All the nuts, bolts and screws used on the JUNO 150 Feed Pusher are
torque tightened to standard torque loadings applicable to the
construction materials used.
If a part has a non-standard torque loading, it is specified in the
applicable part of the manual.
To Next Page
Loading...
