viii
D-I012.1109EN
innovators in agriculture
Registration
The Type and Serial Number Plate is attached to the front side of the
JUNO 150 Feed Pusher. Always include the type and serial numbers of
JUNO 150 when you contact your local Lely service provider or order
spare parts.
Type and Serial Number Plate
We suggest you complete the table below with the type and serial
numbers of your JUNO 150. This makes sure you can easily find the
information.
Type number 5.4301.0000.1
Serial number
Maintenance Authorization
WARNING
Only technicians certified by Lely Industries are authorized to do
corrective maintenance on the JUNO 150.
If people who are not certified by Lely Industries do maintenance on
the JUNO 150, the warranty on the JUNO 150 becomes invalid.
Before a technician does maintenance on a JUNO 150, the owner must
examine the service pass of the technician and make sure the technician
is currently certified to do maintenance on the JUNO 150.
Technician Training
All the technicians certified by Lely Industries have completed an
approved training program, and passed written and practical
examinations during and at the end of the training program. The
examinations are done under supervision of a product specialist and
include troubleshooting and corrective maintenance of the JUNO 150.
There are five certification levels:
• Installation Technician (certification valid for two years)
• Service Engineer (certification valid for two years)
• Senior Service Engineer (certification valid for two years)
• Product Specialist (certification valid for one year)
• Master Product Specialist (certification valid for one year).
During training, a trainee is permitted to work for up to a maximum of
six months on a JUNO 150 in the presence of a certified technician.
To Next Page
Loading...
