Note:Youmustunlocktheleft-sidecovertoopenorremovethebezel.Whenyoulocktheleft-side
cover,itlocksboththecoverandthebezel.
Step2.Openthebezel(see“Removingthebezel”onpage184).
Step3.Pressthelatchtoopenthedrivehandle.Then,rotatethedrivehandletotheopenposition.
Step4.Graspthehandleandpullthedriveoutofthedrivebay.
1
2
Handle
Latch
3.5-inch hot-swap
hard disk drive
3.5-inch filler panel
Figure122.Pulloutthedrive
Ifyouareinstructedtoreturntheservercomponentoroptionaldevice,followallpackaginginstructions,
anduseanypackagingmaterialsforshippingthataresuppliedtoyou.
Installinga3.5-inchhot-swapharddiskdrive
Usethisinformationtoinstalla3.5-inchhot-swapSAS/SATAharddiskdrive.
Beforeinstallinga3.5-inchhot-swapharddiskdrive,readthefollowinginformation:
•Inspectthedrivetrayforsignsofdamage.
•Tomaintainpropersystemcooling,donotoperatetheserverformorethan10minuteswithouteithera
driveorafillerpanelinstalledineachdrivebay.
•Youdonothavetoturnofftheservertoinstallhot-swapdrivesinthehot-swapdrivebays.
Readthesafetyinformationin“Safety”onpagev
and“Installationguidelines”onpage29.
Ifyouarereplacingaservercomponentintheserver,youneedtoturnofftheserverandperipheraldevices,
anddisconnectthepowercordsandallexternalcables.
Toinstalla3.5-inchhot-swapSAS/SATAharddiskdrive,completethefollowingsteps.
Step1.Unlocktheleft-sidecover.
Chapter6.Removingandreplacingcomponents203