Handle
Latch
2.5-inch hot-swap
hard disk drive
2.5-inch fill panel
Figure121.Hot-swapharddiskdriveinstallation
Notes:
1.Afteryouinstalltheharddiskdrive,checkthediskdrivestatusLEDstoverifythatthehard
diskdriveisoperatingcorrectly.IftheyellowharddiskdrivestatusLEDislitcontinuously,that
driveisfaultyandmustbereplaced.IfthegreenharddiskdriveactivityLEDisflashing,the
driveisbeingaccessed.
2.IftheserverisconfiguredforRAIDoperationthroughanoptionalServeRAIDadapter,you
mighthavetoreconfigureyourdiskarraysafteryouinstallharddiskdrives.SeetheServeRAID
documentationontheServeRAIDSupportCDforadditionalinformationaboutRAIDoperation
andcompleteinstructionsforusingServeRAIDmanager.
Step7.Closethebezel(see“Installingthebezel”onpage186).
Step8.Locktheleft-sidecover.
Removinga3.5-inchhot-swapharddiskdrive
Usethisinformationtoremovea3.5-inchhot-swapSAS/SATAharddiskdrive.
Attention:Tomaintainpropersystemcooling,donotoperatetheserverformorethan10minuteswithout
eitheradriveorafillerpanelinstalledineachdrivebay.
Readthesafetyinformationin“Safety”onpagev
and“Installationguidelines”onpage29.
Ifyouarereplacingaservercomponentintheserver,youneedtoturnofftheserverandperipheraldevices,
anddisconnectthepowercordsandallexternalcables.
Toremovea3.5-inchhot-swapSAS/SATAharddiskdrive,completethefollowingsteps.
Step1.Unlocktheleft-sidecover.
202Systemx3500M5InstallationandServiceGuide