Attention:Tomaintainpropersystemcooling,donotoperatetheserverformorethan10minuteswithout
eitheradriveorafillerpanelinstalledineachdrivebay.
Readthesafetyinformationin“Safety”onpagevand“Installationguidelines”onpage29.
Ifyouarereplacingaservercomponentintheserver,youneedtoturnofftheserverandperipheraldevices,
anddisconnectthepowercordsandallexternalcables.
Toremovea3.5-inchsimple-swapharddiskdrive,completethefollowingsteps.
Step1.Turnofftheserverandperipheraldevicesanddisconnectallpowercords.
Step2.Unlocktheleft-sidecover.
Note:Youmustunlocktheleft-sidecovertoopenorremovethebezel.Whenyoulocktheleft-side
cover,itlocksboththecoverandthebezel.
Step3.Openthebezel(see“Removingthebezel”onpage184).
Step4.Pressthereleaselatchtoopenthedrivehandle.Then,tograspthedrivehandleandpullthe
harddiskdriveoutofthedrivebay.
Handle
Latch
3.5-inch simple-swap
hard disk drive
3.5-inch filler panel
Figure124.Simple-swapharddiskdriveremoval
Ifyouareinstructedtoreturntheservercomponentoroptionaldevice,followallpackaginginstructions,
anduseanypackagingmaterialsforshippingthataresuppliedtoyou.
Installinga3.5-inchsimple-swapharddiskdrive
Usethisinformationtoinstalla3.5-inchsimple-swapharddiskdrive.
Beforeinstallinga3.5-inchsimple-swapharddiskdrive,readthefollowinginformation:
•Inspectthedrivetrayforsignsofdamage.
Chapter6.Removingandreplacingcomponents205