Linde H50D - Page 73

Operation 4
Standard equipment
CAUTION
Attachments affect the load capacity and stability of
the truck.
Attachments that are not supplied with the truck
should only be used if the authorised dealer has
checked that the arrangement in terms of load
capacity and stability ensures safe operation.
NOTE
The methods of attachment operation descri-
bed here are examples. The configuration
of the joystick may vary depending on your
truck’s equipment.
¾ Take note of the switching symbols with
arrows.
NOTE
For every attachment, a label stating the load
capacity of the truck plus attachment (for a
description, see "Additional capacity rating
plate for attachments") must be affixed within
the driver’s range of vision and a symbol label
for the relevant attachment must be affixed
behind the joystick.
Operating the sideshift
NOTE
In order to prevent damage, do not activate
the sideshift when the fork arms are on the
ground.
¾ Push joystick (2) to the left.
Sideshift moves to the left.
¾ Push joystick (2) to the right.
Sideshift moves to the right.
Operating Instructions – 394 807 10 01 EN – 07/2011 61