To Next PageTo Next Page
Need help?Do you have a question about the Loadrite L2180 and is the answer not in the manual?
General| Brand | Loadrite |
|---|---|
| Model | L2180 |
| Category | Front End Loaders |
| Language | English |
Provides tips for achieving maximum weighing accuracy by controlling lifting speed and bucket position, and discusses legal for trade systems.
Explains the procedure for warming up the hydraulic fluid for accurate weighing.
Describes how to periodically zero the bucket for accuracy, including FACT updates.
Explains the process of weighing a bucketload and adding it to the total, including Auto-Add and remote buttons.
Explains how to clear the short total after completing a load.
Details the methods for putting the Loadrite Indicator into Standby mode.
Describes the default layout of the Total screen and its components.
Explains the Compact layout of the Total screen and how to change product/data.
Describes the Scroll layout of the Total screen and how to change product/data.
Defines and explains how to manage short and long totals for products.
Explains the use of eight customizable data fields for tracking weighing data, including selection, adding, and editing.
Covers advanced options for data management and look-ups, including auto-target and auto-tare.
Explains how to load a truck to a predefined target weight.
Describes weighing and loading products according to a predefined recipe.
Describes weighing products according to a recipe without a grand target.
Describes loading products based on a recipe with a total number of loads required.
Splits total weight into sub-totals for loading train wagons or trucks with trailers.
Creates one grand total for all products, ensuring a total weight limit is not exceeded.
Explains the default method of adjusting final load by tipping measured product.
Describes the method of dumping product until the right amount is reached.
Guides on entering a tare weight for deducting from a load.
Details how to record a reason for a delay to weighing.
Displays KPI metrics and efficiency ratings for the current workday.
Details options for automatic printing based on configuration.
Explains options for immediately printing data from the Print Menu.
Accesses the Install Menu and other features via an access code.
Controls whether the Auto-Add functionality is enabled or disabled.
Allows the user to enter a tare weight value for deduction.
Covers adding and editing data field values.
Explains how to check and re-perform span calibration adjustment.
Explains errors occurring due to significant bouncing of lift arms.
