Loadrite L2180 - Display; Changing the Screen Brightness; Changing the Screen Contrast; Selecting Arm Graphic

13.0 Setup Menu
3.
Press orto selectAMorPM.
4.
Press toconfirmthenewalarmtime.
13.13 Display
Thisoptionallowsthedisplaytobeconfigured.Thefollowingmenuitemsareavailable:
13.13.1 Changing the screen brightness
Tochangethebrightnessofthedisplayscreen,completethefollowing:
1.
Fromthe DisplayMenu selectLight,thenpress .
2.
Press - toselectthedesiredbrightnesslevel.
3.
Press tosavethebrightnesslevel.
13.13.2 Changing the screen contrast
Tochangethecontrastofthedisplayscreen,completethefollowing:
1.
Fromthe DisplayMenu selectContrast,thenpress .
2.
Press - toselectthedesiredcontrastlevel.
3.
Press tosavethecontrastlevel.
13.13.3 Selecting Arm Graphic
Toselectwhethertheloadergraphicorbargraphdisplaysonthe Total screen,completethefollowing:
NOTE – Theloadergraphicwillonlybedisplayedifthe Total screenlayoutissettoClassic.Ifthe
Total screenlayoutissettoCompactorScroll,thebargraphwilldisplay.
1.
Fromthe DisplayMenu selectArm Graphic,thenpress .
2.
Press or toselectLoaderorBar Graph.
If you would like
to...
Then...
theloadergraphictodisplay
onthe Total screen
press or toselectLoader.
thebargraphtodisplayon
the Total screen
press or toselectBar Graph.
Loadrite L2180 loader scales | 73