Loadrite L2180 - 8.0 Advanced Weighing: Tare Weight; 8.1 How do I enter a tare weight?

8.0 Advanced Weighing: Tare Weight
8.0 Advanced Weighing: Tare
Weight
The TareWeight functionality is only available if selected at installation.
Therearetwodifferentmethodsofdeductingatareweightfromaload,dependingonthewayyourLoadrite
WeighingSystemhasbeensetup:
Tare – Lifted weight
Thetareweightcanbedeductedatthetimewhentheweightislifted.
Forexample,ifpalletsarebeingused,theweightofapalletcanbeenteredasthetareweight.TheLoadrite
WeighingSystemwillautomaticallydeductthepalletweightfromtheliftedweightanddisplaysthenetweightof
theload.
Tare – Total weight
Thetareweightcanbeaddedtothetotalweightoftheload.
Forexample,ifyouareloadingavehicleortruckwithaknownmaximumweight,theweightofthevehicleor
truckcanbeenterasthetareweight.TheLoadriteWeighingSystemwillautomaticallyaddthetareweighttothe
totalloadweighttoensurethatthevehicleisnotloadedbeyondthemaximumweight.
8.1 How do I enter a tare weight?
Toenteratareweight,completethefollowing:
1.
Press .
The SetupMenu willdisplay.
2.
SelectTare Entry,thenpress .
The Tare? screenwilldisplay.
3.
Usethekeypadtoentertherequiredtareweight,thenpress .
NOTE – Ifthetareweightis0.000,lessthanthesetincrementsize,oristoolarge,theTare Off
messagewilldisplaybeforethe Total screenisdisplayed.
TheTare Updatedmessagewilldisplaybeforethe Total screenisdisplayed.
Loadrite L2180 loader scales | 56