Loadrite L2180 - How Do I Reset the Target; How Do I Return to Total Mode

6.0 Operation Modes
7.
Press toaddthebucketloadtothetruck.
Amessagewilldisplaythenumberofbucketsaddedtothecurrentload,forexampleBucket Add #1.
8. Emptythebucketloadintothetruck.
9. Repeatsteps5-7untilthetargetweightvalue(bottomnumber)isascloseaspossibletothetargetweight
value(topnumber).
10.
Press toclearthetargetweightvalue.
The Total screenwilldisplay.
6.1.2 How do I reset the target?
Whentheloadiscomplete,thetargetmustbereset.Thisistheequivalentofclearingtheshorttotalin Total 
mode.
n
Toresetthetarget,press .
TheTarget Resetmessagewilldisplaybrieflyandthenthe Target screenwilldisplay.
6.1.3 How do I return to Total mode?
Toreturnto Total modefrom TargetWeighing mode,thetargetmustbesetto0(zero).
1.
Press .
2.
WhentheTarget?messageisdisplayed,press ,thenpress .
The Total screenwilldisplay.
Loadrite L2180 loader scales | 41