Loadrite L2180 - Setting the Date; Setting the Year; Alarm; Alarm Time

13.0 Setup Menu
2. Usethekeypadtoenterthetime:
a.
Press or toselectAMorPM.
b.
Press toconfirmthenewtime.
13.12.2 Setting the date
1.
Fromthe ClockMenu selectDate,thenpress .
2. Usethekeypadtoenterthemonthandday:
a. Press1-9forJanuarytoSeptember;Press0then0forOctober;Press0 then1forNovember;Press
0then2forDecember.
b.
Press toconfirmthenewdate.
13.12.3 Setting the year
1.
Fromthe ClockMenu selectYear,thenpress .
2. Usethekeypadtoenterthelasttwodigitsoftheyear.Forexample,press1then6for2016.
3.
Press toconfirmthenewyear.
13.12.4 Alarm
ThisoptionturnsthealarmclockOnorOff.Whenthealarmtimeisreached,thefollowingwilloccur:
n
analerttonewillsound,
n
theAlarm Clockmessagewilldisplay,
n
(Trigger light)willflash.
Thealarmwillstopafterafewsecondsorwhenanybuttonispressed.
ThealarmclockwillalertwhentheIndicatorisin Ready or Standby mode.Thealarmclockwillnotalertifthe
Indicatoristurnedoff.
13.12.5 Alarm time
Thisoptionchangesthealarmtime.
NOTE – ThealarmwillonlyalertiftheAlarmoptionissettoOn.
1.
Fromthe ClockMenu selectAlarm Time,thenpress .
Thealarmtimewilldisplaywiththecursoroverthefirstdigit.
2. Usethekeypadtoenterthetime.
Loadrite L2180 loader scales | 72